whats interesting in the top on is that with all the channels, only the top one shows a lot of resistance, this is obviously due to much more water flowing through it. the next two show a bit as well, the middle ones have no flow going through them, and the final few have quite a bit of flow. this is exactly not what we want.
the second one is fairly even, which is good, although near the entry there seems to be a lot of resistance, presumable due to the turbulance of the water at this point.
the third one is much the same as the second one I think.
do you think it would be possible to do the same as for these designs I've attached? (central inlet, two outlets) Thanks in advance
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|