Pro/Forums - View Single Post

packetsdontlie · 09-10-2004, 09:13 PM

I'm still having trouble with my snap upgrade. I have a Snap 4000. I have four (qty) Maxtor 5A300J0 drives - 300 GB apiece. I've downloaded this document from Maxtor: http://www.maxtor.com/_files/maxtor/..._ii_manual.pdf

I've tried to follow the previous posts. I've set my jumper so the drives appear to be nothing more than a 32 GB drive. When I do that, the front LED on the Snap server flash amber synchronously across all four disk lights. http://snapserver/config tells me there are no drives to configure.

When I remove the 32 GB jumper on the drive, the server sees the drives just fine, but formats them around 120 GB. I've tried the LBA commands from the http://snapserver/config/debug window, but there is no change in behavior.

Spec: Snap 4000
Software: 4.0.8.30
Hardware: 2.2.1
BIOS: 2.4.437

Does anyone have any ideas?

09-10-2004, 09:13 PM	#235
packetsdontlie Cooling Neophyte Join Date: Aug 2004 Location: denver Posts: 2	I'm still having trouble with my snap upgrade. I have a Snap 4000. I have four (qty) Maxtor 5A300J0 drives - 300 GB apiece. I've downloaded this document from Maxtor: http://www.maxtor.com/_files/maxtor/..._ii_manual.pdf I've tried to follow the previous posts. I've set my jumper so the drives appear to be nothing more than a 32 GB drive. When I do that, the front LED on the Snap server flash amber synchronously across all four disk lights. http://snapserver/config tells me there are no drives to configure. When I remove the 32 GB jumper on the drive, the server sees the drives just fine, but formats them around 120 GB. I've tried the LBA commands from the http://snapserver/config/debug window, but there is no change in behavior. Spec: Snap 4000 Software: 4.0.8.30 Hardware: 2.2.1 BIOS: 2.4.437 Does anyone have any ideas?