Quote:
Originally Posted by brucoman
RD-30
running 24/7 last month with (2) G4's & Fedco 2-342
running on a 3.2A PS at 24v
measured running current draw 0.3A (with clamp-on meter), up to 0.7A at free flowing
curious as to low current draw as measured
also note, must turn pump on/off with switch in DC line, not AC line or pump often fails to restart (as documented by Iwaki)
Iwaki calls for min. 22v to start, haven't tested that yet
|
Did you put the clamp-on meter on just one leg of the power supply ac line?
edit: most clamp-on meters are inaccurate. I take the readings from mine with a grain of salt...