Quote:
|
Originally Posted by AngryAlpaca
Yeah, 60% more flow in an actual system isn't that great.  How much improvement does the D4 allow? |
err no - at 16V its 60% more than
10V.....
mcp600
12.0v 0.98A 11.8W 5.8LPM
16.0v 1.41A 22.6W 8.0LPM
which is a 38% improvement....
the D4 gave:
12V approx 19W 7.5LPM
16V approx 24W 10.5LPM
http://forums.overclockers.com.au/sh...5&pagenumber=7
why would you go to the effort of overvolting an mcp600 (seperate psu, separate control circuit, plus an unknown effect on the life etc...)
when a stock D4 delievers virtually the same performance without the hassle. the attraction of overvolting the D4 is iwaki performance cheaper and more compact.....