|
Cooling Savant
Join Date: Aug 2004
Location: Granite Bay, CA
Posts: 105
|
I apologize to the Moderators if I didn't do this correctly. Here is the continuation of photos.
You can see The Swiftech NB cooler was in the way of the GPU WB mounting bolts, so I had to shorten them.
I made the pump isolation mounting plate of various layers of Aluminum, steel, and different densities of foam.
All tubing is 1/2" ID with some 5/8" OD and some 3/4" OD.
Just a few rough reference measurements using built in Abit EQ and an external electronic temp gauge.
The Thermaltake water temp gauge was defective from the start( flashing all display, then backlight completely quit).
__________________
ASUS Maximus II Formula, E8600@4050,
OCZ 2x2GB PC2 8500@5-5-5-18, Vista 64,
GTX 280@693/1508/2566, Audigy 2,
PC P&C 750, ASUS DVD R/RW,
Velociraptor 300, Raptor 74,
Storm rev2, modified Laing DDC,
modified HL BI2 Extreme, 7/16 ID Tygon,
modified DD res, PC ICE, TT liquid temp monitor
|