RD-30
running 24/7 last month with (2) G4's & Fedco 2-342
running on a 3.2A PS at 24v
measured running current draw 0.3A (with clamp-on meter), up to 0.7A at free flowing
curious as to low current draw as measured
also note, must turn pump on/off with switch in DC line, not AC line or pump often fails to restart (as documented by Iwaki)
Iwaki calls for min. 22v to start, haven't tested that yet
Last edited by brucoman; 12-05-2004 at 11:38 AM.
|