peltier jet impingement
well after about two other prototypes (basicly two failed #rotor blocks) i decided to do a large scale jet impingement waterblock because it would be much easier to make. so far i have the part that the hoses will be attached to made and the base made, i am still in the process of making the top and the spacer in between the base and the area were the hoses will be attached. this is what it looks like right now, oh and all of the block will be made with just a dremel and a drill press (and maybe a band saw).
__________________
My Computer:
|| Athlon XP 2500+ @ 227 x 10 stock vcore (my mobo is holding me back, time for a vdd mod) | ASUS A7N8X Deluxe | 512 MB dual-channel OCZ PC-3200 Platinum DDR RAM | GeForce 5200 @ 309/415 (getting ATi 9800 Pro for christmas) | 120 GB 7200 RPM Western Digital HD | 2 x 80 GB 7200 RPM Western digital hard drive in raid 0 configuration | Homemade waterblock | 350 GPH mag pump | 2 x 1985 7-3/4" x 7 x 2 Heatercore | Homemade res. | 226 Watt TEC ||
Personal philosophy: "But this goes up to eleven."
|