Pro/Forums - View Single Post - FS- My water cooled Shuttle SN45

mikehotel · 07-11-2004, 03:57 PM

Parts list:
• Black mesh case cover by shuttle
• Barton 2500+ Unlocked Runs at up to 2.4 Ghz
• 512 Platinum Edition XMS pc 2700ll ram –Runs at 400 FSB as pc 3200 passes memtest 86 and windows diagnostic with no errors.
• Silent 200 watt PSU polished with cables sleeved with black
• Sony multi-format DRU530A DVD Burner / 8x4x12x DVD+RW / 4x2x12x DVD-RW / 40x24x40x CD-RW / Dual Format
• Seagate 7200 rpm 80 GB HDD, barracuda 4 I believe…dead silent and fast
• Sapphire Radeon 9800 Pro 256XT

Modifications:
• Custom made aluminum face plate by Schaffer aberterbrau
• Red LED Vandal switch
• Red high intensity HDD activity light
• Rear grill cut out
• PSU grill cut out
• Drive cage reduced by one 3.5 spot
• Black light leds x 6
• 80-120 led fan
• Panaflow medium volume fan on the radiator
• Zalman on northbridge
• Black South pole Microsinks on PPLs and all MOSFETS
• Black sleeving on Everything!
• 2 Extra USB ports, in the printer cable break out

Water cooled with:
• Swiftech MCW6000
• C-systems pump
• X-ice GPU block
• 10mm tubing (3/8ths)
• D-tek Customs Chrome radiator
• Eheim valves for fill and bleed

Extras:
• All original Packaging and documentation, Cd’s ect..
• All cabling
• AMD ICE and shroud
• Heatsink and fan for 9800 Pro
• Extra fans, 2 80 mm’s one red LED shartoon, and stock Sunon

I am probably forgetting some stuff; just send me an e-mail if interested at mheistan@hotmail.com or a PM. I ship USPS Priority mail only since it is the only shipping method available to me currently as I live in Germany. I will ship anywhere, and only will take paypal. Insurance on buyer’s request.

Asking 1000.00 US Dollars. This is a smoking, one of a kind system, custom modified by me silent and very overclockable, and priced well below my cost. Why am I selling, you ask? I want to move on to a new project. I have 2 high flow panaflows w/h RPM monitoring on the way to me to take the place of the current medium flow panaflow, and my "Ghetto" 70 mm fan hanging off the back, I found I needed more airflow to cope with the heat of summer. -MKH

Front shot custom faceplate with stealthed DVD burner:

Back Grills removed:

Side shot X-ice GPU:

Fill and bleed valve:

PSU side:

Fill and bleed in action:

CPU block-Tight fit:

Loop test:

Running the tubes:

Fan/Rad:

07-11-2004, 03:57 PM	#1
mikehotel Cooling Neophyte Join Date: May 2004 Location: AZ Posts: 43	FS- My water cooled Shuttle SN45 Parts list: • Black mesh case cover by shuttle • Barton 2500+ Unlocked Runs at up to 2.4 Ghz • 512 Platinum Edition XMS pc 2700ll ram –Runs at 400 FSB as pc 3200 passes memtest 86 and windows diagnostic with no errors. • Silent 200 watt PSU polished with cables sleeved with black • Sony multi-format DRU530A DVD Burner / 8x4x12x DVD+RW / 4x2x12x DVD-RW / 40x24x40x CD-RW / Dual Format • Seagate 7200 rpm 80 GB HDD, barracuda 4 I believe…dead silent and fast • Sapphire Radeon 9800 Pro 256XT Modifications: • Custom made aluminum face plate by Schaffer aberterbrau • Red LED Vandal switch • Red high intensity HDD activity light • Rear grill cut out • PSU grill cut out • Drive cage reduced by one 3.5 spot • Black light leds x 6 • 80-120 led fan • Panaflow medium volume fan on the radiator • Zalman on northbridge • Black South pole Microsinks on PPLs and all MOSFETS • Black sleeving on Everything! • 2 Extra USB ports, in the printer cable break out Water cooled with: • Swiftech MCW6000 • C-systems pump • X-ice GPU block • 10mm tubing (3/8ths) • D-tek Customs Chrome radiator • Eheim valves for fill and bleed Extras: • All original Packaging and documentation, Cd’s ect.. • All cabling • AMD ICE and shroud • Heatsink and fan for 9800 Pro • Extra fans, 2 80 mm’s one red LED shartoon, and stock Sunon I am probably forgetting some stuff; just send me an e-mail if interested at mheistan@hotmail.com or a PM. I ship USPS Priority mail only since it is the only shipping method available to me currently as I live in Germany. I will ship anywhere, and only will take paypal. Insurance on buyer’s request. Asking 1000.00 US Dollars. This is a smoking, one of a kind system, custom modified by me silent and very overclockable, and priced well below my cost. Why am I selling, you ask? I want to move on to a new project. I have 2 high flow panaflows w/h RPM monitoring on the way to me to take the place of the current medium flow panaflow, and my "Ghetto" 70 mm fan hanging off the back, I found I needed more airflow to cope with the heat of summer. -MKH Front shot custom faceplate with stealthed DVD burner: Back Grills removed: Side shot X-ice GPU: Fill and bleed valve: PSU side: Fill and bleed in action: CPU block-Tight fit: Loop test: Running the tubes: Fan/Rad: