Pro/Forums - View Single Post

gergregg · 01-07-2003, 11:12 AM

Freeloadingbum

I used a 1/4" MPT to 1/2" tubing barb. The inside diameter is the same for the 1/2" barb as it is for the 1/4" MPT. As for flow, the pump with nothing more than about 18" of 1/2" tubing would flow about 8.4L per minute. With the block in line and another piece of tubing about the same length I got about 6L per minute.

01-07-2003, 11:12 AM	#48
gergregg Cooling Neophyte Join Date: Nov 2002 Location: Spokane, WA Posts: 2	Freeloadingbum I used a 1/4" MPT to 1/2" tubing barb. The inside diameter is the same for the 1/2" barb as it is for the 1/4" MPT. As for flow, the pump with nothing more than about 18" of 1/2" tubing would flow about 8.4L per minute. With the block in line and another piece of tubing about the same length I got about 6L per minute.