Pro/Forums - View Single Post

rpalamara · 02-17-2006, 11:48 PM

Just my two cents.

I have some Sanyo Denkis that are wired for 7 volts and are fine. Never had a problem with them not starting. They dont have a motor whine but they do have a bearing noise and when combined with the radiator they make more noise. Right now my fan on my evga 7800gt is louder than the Denkis at 7 volts(at 12v they are unbearable).

I was thinking of getting M1as but at 7v they put out slightly less air than the Yates-Loon at 12v and the noise is about the same.

I have 3 Yates loon also and will test if there is any temp difference in my system between Yates at 12v and Denki at 7v with a PA 120.3.

02-17-2006, 11:48 PM	#50
rpalamara Cooling Neophyte Join Date: Jan 2006 Location: Florida Posts: 11	Re: How to choose the optimal 120mm fan? Just my two cents. I have some Sanyo Denkis that are wired for 7 volts and are fine. Never had a problem with them not starting. They dont have a motor whine but they do have a bearing noise and when combined with the radiator they make more noise. Right now my fan on my evga 7800gt is louder than the Denkis at 7 volts(at 12v they are unbearable). I was thinking of getting M1as but at 7v they put out slightly less air than the Yates-Loon at 12v and the noise is about the same. I have 3 Yates loon also and will test if there is any temp difference in my system between Yates at 12v and Denki at 7v with a PA 120.3.