Okay, that isn't a heatercore. First off, an aluminum radiator will cause many problems with a copper block. Additives only lessen those problems. Second, that is a tranny cooler, not a heatercore. Engine/Tranny coolers are aluminum, heatercores are copper/brass. I wouldn't use that if I were you ... but that's just me. It would probably work okay, if you had an aluminum block, of course, though you'll have worse performance than using a copper system.
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied
|