From this thread in the case modders section:
Quick release valves
Quote:
|
Originally Posted by Hansfragger
I have been searching for a pair of quick disconnect fittings with valves in each side, bulkhead fittings on the case side, barbs for 1/2" ID hose, and 1/2" flow through the valve body. Omega and Colder make some, but only with 3/8" flow through the valves. They make a few configurations with 1/2" flow, but only for 3/4" ID hose. Colder also makes a beautiful aluminum 5/8" flow FL series which they state is their "highest flow, lowest pressure drop, valved couplings offered by CPC", but it is in-line. Good Luck!
|
Any comments on this? 3/8" ID would be a bummer.