James-
Thanks for the pictures and the additional information about the problems with flow with the single 1048 pump!!! I'm checking the diagrams now, and it seems that given a 12" tower and the MCW6000 (I think its that block) you only have about 1ft of head reamaining to achive 1gpm of flow, which isn't really enough to travel the tubes as configured. That gives me some "real world" knowledge to make estimations as to my configuration (as this will be my first WC configuration).
I'm settling on a configuration using a 18" dual pass transmission cooler (I just have to review my old fluids textbook) with a DangerDen DDC (Swiftech 350)pump and DangerDen TDX block. I think i have convinced myself that the dual pass coolers have a center partition, because the company makes them up to 30" in dual pass configuration. Given the viscosity of oil, over 90% of the cooler wouldn't be used for cooling the oil if it didn't have some kind of partition. I did find one place that I could get an dual pass anodized version (up to 30"), but at $160 for the $24" version, I think I'll have to live with the ebay 18" raw alum. version and just take care about the additatives.
Cheers
-DrPyro
|