Quote:
Originally posted by WinFlex
doh. one inch = 25.4mm ... remember that one, it's an exact value!
Also, nobody has specified the exact diameter of these holes. The alpha pal heatsink appears to be using #6 ANSI mounting screws. Can anybody confirm this or specify an exact hole diameter 
TNX, Felix
|
#6 will fit all mobo holes. the original hole size used to be 0.210 inch, but most mobo manufacturers have reduced it to 0.150 inch.
In the USA, use 6-32 or 6-24 (?) machine screws. Nylon is just fine.