Pro/Forums - View Single Post

Jessfm · 01-11-2003, 01:05 PM

J, make BP more like 2mm. 4mm is too much even with flat plate design.

Also I would extend a pipe from the inlet barb down towards the BP, I would start with a 8mm gap and then test. make it with copper tube and in 2 peice ( telescopic) will allow you to have virtualy infinite adjustment.

01-11-2003, 01:05 PM	#33
Jessfm Cooling Savant Join Date: Apr 2002 Posts: 110	J, make BP more like 2mm. 4mm is too much even with flat plate design. Also I would extend a pipe from the inlet barb down towards the BP, I would start with a 8mm gap and then test. make it with copper tube and in 2 peice ( telescopic) will allow you to have virtualy infinite adjustment.