scopEDog's Ceberus WB1 in G1/4" nestles nicely into its new home. Plus some semi-custom LGA-775 to PGA-478 mounting plates - that was fun. Broke a drill bit and a tap in the process? can you tell where I fowled up? NO! 1337 sauce!
Intake from radiator plumbed - system is 1/2" in, 3x10/8mm out to Silentstar HDD, Twinplex GPU, and Twinplex Northbridge.
The sun shines for the first time on the Cerberus WB1 inside it's new home. I started the switch at 12:30 AM and didn't finish until 7AM. Oi vey.
And this was one of the reasons why, the SF800 flowmeter (and this one WORKS!) is finally in place after almost a year, and one dead SF800 behind it.
I also moved the pump to where the old splitter used to sit - the DDC has gone back to a stock top (thanks again for the parts scopEDog!) and makes for a very compact setup. Plus, personally, I think the all-black 8/10mm tubing is very sexy.
The other thing I did... I stripped all the sheet metal panels off the case, if you didn't notice. I don't have the $$$ to do have them professionally painted now, but I refuse to do anything less. The blends need to be perfect from mesh to metal, and from the flush-fit window... my skills aren't up to it. I'd happily send another forum-goer the business, so PM me if you're interested.
This is far from over. I will never give up.