the memory timings are set to cas 2 3-3-6 which isnt what the memory is rated too ( cas 2 2-2-6) if i set it to those values it will beep
if my memory is set to 133 i have a little option that will tell me that i can increase up to 200% or decrease to 50% which means if the fsb is set to 200 i can put it so it will boot at 75% for the memory speed or which ever option i feel between the values above.....
If i go down on the fsb it makes it slower than it already is which isnt helping, i wanted it to be going higher!!!
my agp is at an auto setting but i can set it to what ever i want, i dont know about the pci side of things as i cant see an option for them but when i had my older board ( this is a repacement because the other went wrong) i was able to run at 200fsb with the same memory and the everything used to run fine (but it wasnt quick enough
)
i believe it is something to do with the ram as before it was running fine with this memory but now it dont seem to like it, im very annoyed as i was led to believe the memory is the best and it seems not to be the case at all.....