Pro/Forums - View Single Post

TerraMex · 01-28-2003, 12:38 PM

I've seen that being done, but with a regular HeaterCore. Havent seen it with a BIX. Might work.

The problem with the fan mouting holes is that they are smaller then they should (imo). Trying to put a screw from one side to the other should prove to be somewhat difficult. I used (like i said before) screws small enought not to damage the BIX, and secured the fans to the shroud .

To try to do something like that, i guess you need to find a 3mm (diameter) screws with at least 50mm lenght to clear across the BIX. GL.

01-28-2003, 12:38 PM	#8
TerraMex Cooling Savant Join Date: Nov 2002 Location: Portugal, Europe Posts: 870	I've seen that being done, but with a regular HeaterCore. Havent seen it with a BIX. Might work. The problem with the fan mouting holes is that they are smaller then they should (imo). Trying to put a screw from one side to the other should prove to be somewhat difficult. I used (like i said before) screws small enought not to damage the BIX, and secured the fans to the shroud . To try to do something like that, i guess you need to find a 3mm (diameter) screws with at least 50mm lenght to clear across the BIX. GL. __________________ "we need more cowbell."