I needed to make a door for the 5 1/4 bays so that I can keep them dustproof. I could have made just a black front but decided to spice it up a little. I had a window etch and decided to do a little messing around. I cut out a shape around the etch, and spray painted the back black to highlight the etches. After sanding off most of the black, I added a coat of red, and ended up with this.
After I had that, I needed to cut out the door, and use router and chisel to get the desired depth to embed the etch into the door.
I polished a piece of aluminum to a mirror finish (fun fun) and cut it to the same shape as the etch. Then I random sanded the back of the etch again to give an abstract appearence and placed the aluminum behind it. Slapped on a case badge in the square that I chisled out and one bay door.
There is a magnet already imbedded in the case, so all thats left now is putting the handle on, and the catch for the magnet, and the hinges.