It's not really a big issue.
Home depot has a pretty weak selection of barbs, from my experiences, but places liek Ace Hardware have enough to do the weird stuff (except they don't have any "good" 1/2"hose to 1/4"NPT barbs for some reason). I was able to get nice brass barbs to convert the male and female 1/2" pipe thread on my Danner Mag3 to 1/2" hose for about $2 per barb.
__________________
Abit NF7-S ... xp1800+ ... Abit GF4ti4200 ... Maxtor 120gb SATA150
Currently gathering parts to water cool everything! ( read about the project)
|