The pump to the secondary loop is the a 250 GPH pump.
I'm going to use the new pump(s) i purchase on the main loop.
I just want to know what the difference would be between 2 - 250GPH pumps, and 1 - 500GPH pump on the main loop.
the way i'll set it up the main loop is:
With ONE 500GPH pump:
pump -> heatercore -> cpu -> reservoir
With TWO 250GPH pumps:
pump -> heatercore -> cpu -> pump -> reservoir
I guess my main motivation for having the 2 smaller pumps is the lower noise level, versus the 1 larger pump.
Thanks for the help
Last edited by ben333; 01-25-2009 at 06:30 PM.
|