The temperature difference between the two should be minimal (couple of degrees). Since you are working with a small case, I would say use whatever configuration fits in the case. If you are worried about EMF interference, you could simply cover the pump in some sort of metal shielding (I think aluminum foil would cut it). Might look ghetto... I'd only tell you to do it if you are extremely paranoid. Make sure your system is leak free. I had problems with an L30 about a year ago (there was a leak at the inlet). Luckily mine was at the bottom of my case. One drop of water in your case, due to the proximity of the pumps, could spell disaster.
|