Pro/Forums - View Single Post - Common pump P-Q Curves (graph inside)

Dave · 07-13-2005, 04:01 PM

^ Looks about right, using DD or D-Tek 1/2" tubing adaptor.

Just note, our data is based on 12.5-13V, not 12V.

Most power supplies run at 12.6 volts, as we tested.

I will do a series MAG test this weekend, using DD's fitting and post results.

Dave

** Note 12.6 volts is average of 10 different power supplies we tested. It was suggested to me that I do not indicate all supplies run above 12V, as it can be mis-leading, which is the last thing we want.

07-13-2005, 04:01 PM	#72
Dave Cooling Savant Join Date: Oct 2004 Location: Canada Posts: 260	^ Looks about right, using DD or D-Tek 1/2" tubing adaptor. Just note, our data is based on 12.5-13V, not 12V. Most power supplies run at 12.6 volts, as we tested. I will do a series MAG test this weekend, using DD's fitting and post results. Dave ** Note 12.6 volts is average of 10 different power supplies we tested. It was suggested to me that I do not indicate all supplies run above 12V, as it can be mis-leading, which is the last thing we want. Last edited by Dave; 07-13-2005 at 05:10 PM.