Quote:
|
Originally Posted by snap-tech
The cpu is ok. I meant 733 not 766.
Try the other memory. I will also try a stick of non-parity in mine and see if it only displays the backplane version later today and see.
Douglas Snap-Tech
|
Made some SERIOUS headway today. Both jumpers were set on the MB (System reset and load from flash / ROM). Pulled them (jumpers) and replaced the RAM with 512MB PC100 ECC Compaq server RAM and I get it to boot!!!
I have tried four network cards and I still only can get the "Searching for IP" message, System LED flashes once a second and NO Link LED... I don't have any spare 64bit Intel Pro 1000 NICs but does it matter if I tried some 3COM 3c90x models as a test?
Can't get it to link so saying that Assist never finds it probably is redundant...
I am so close now... guess I'll track down a real server Pro 1000 NIC and see what that does.
Thanks for all the help!