Quote:
Originally posted by morphling1
Other than that, good to see you found thos saw blades, I'm just looking at a catalogue here, they go from thickness 0.2mm and up this is a lot better then milling , and arbor is very easy to do, I have one but it is for larger blades, but I'll also make one for those fine thin saw blades, then the fun begins
|
Yeah, it was a real kick in the ass, considering that that's what I suggested in the very 1st post!
I still have to iron out the details of how this blade is going to work, but if they are available as small as 0.2mm, then that tells me that I'm headed in the right direction, or at least that I'm not deluding myself!
Strangely, BillA suggested (or implied) "cross-cutting" to Cathar, in his design. With this 20mm blade, I'll be there!
To all, I almost forgot... the top is a structural part of the block, because of the very thin baseplate (2 mm) and as I've said before, it must be copper, possibly 6mm thick, otherwise the block might collapse over the CPU.
Sorry, no light show.
G'day!