Pro/Forums - View Single Post

blue68f100 · 09-05-2008, 10:04 AM

Once you break it down to individual you will loose all your data, clean JBOD. You may try using the /force cmd if resysn does not work. Spinrite has been know to repair minor problems like this. And sometimes it will take over 4+ hrs to mount in degrade mode because it does a check to make sure all is good.

You are right on the orphin state.

09-05-2008, 10:04 AM	#4
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: Resync orphaned drives in RAID 5? Once you break it down to individual you will loose all your data, clean JBOD. You may try using the /force cmd if resysn does not work. Spinrite has been know to repair minor problems like this. And sometimes it will take over 4+ hrs to mount in degrade mode because it does a check to make sure all is good. You are right on the orphin state. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820