Pro/Forums - View Single Post

Gulp35 · 04-24-2003, 07:00 PM

It uses 10 nozzels 1/16" in diameter, the bottom dimples are 3/16" in diameter, The red area under the nozzle diagram is the CPU core and the Dark red is 2mm away from the edge of the CPU core.

I'm gonna buy this once I get some copper (1/8" thick) and buy my pumps (2 maxijet1200s)

EDIT: To get the pic to work, right click it, and choose properties. then copy and paste the URL into your nav bar. Sorry about the inconvieniece :EDIT

http://www.helmetofshame.com/vanderc.../honeycomb.jpg

04-24-2003, 07:00 PM	#118
Gulp35 Cooling Savant Join Date: Sep 2002 Location: Atlanta, GA Posts: 135	My adaptation to BB2k/Volenti Design It uses 10 nozzels 1/16" in diameter, the bottom dimples are 3/16" in diameter, The red area under the nozzle diagram is the CPU core and the Dark red is 2mm away from the edge of the CPU core. I'm gonna buy this once I get some copper (1/8" thick) and buy my pumps (2 maxijet1200s) EDIT: To get the pic to work, right click it, and choose properties. then copy and paste the URL into your nav bar. Sorry about the inconvieniece :EDIT http://www.helmetofshame.com/vanderc.../honeycomb.jpg __________________ Epox 8RDA+ v1.1----------Tyan K8SDPro 1700+ JUIHB 0310XPMW (12.5x200Mhz@1.792v)--------2xOpteron246 (2Ghz 1MB L2) 2x256MB Kingston PC3000 (BH5?) 2-2-2-8 2.7v---2x512MB Corsair Reg.&ECC PC3200 ATi Radeon 9800Pro (stock, too hot)-----ATI RageXL WD800JB+WD2500JB-------WD1600JD Sony DVD/CDRW-------NEC 3520A Black Forton350W--------Antec TruePower2.0 550W EPS12v Last edited by Gulp35; 04-25-2003 at 06:54 AM.