Pro/Forums - View Single Post

Gooserider · 07-24-2003, 01:49 AM

I have a wide range of 'implements of destruction', ranging from Oxy-Acetelyne torches, to a SawzAll, assorted grinders, and a rather crappy milling machine.

Assuming you mark out the cut line precisely and indelibly (preferably scribed on Dykem Blue, but a fine line Sharpie would do) I am reasonably sure I could handle it.

I'm guessing at a cost, but probably something in the neighboorhood of $20 or so, plus shipping, mostly because of the hassle factor of shipping it, etc.

PM me if interested so we can do details like addresses and so forth.

Gooserider

07-24-2003, 01:49 AM	#2
Gooserider Cooling Savant Join Date: Jun 2003 Location: North Billerica, MA, USA Posts: 451	What is the thickness? I have a wide range of 'implements of destruction', ranging from Oxy-Acetelyne torches, to a SawzAll, assorted grinders, and a rather crappy milling machine. Assuming you mark out the cut line precisely and indelibly (preferably scribed on Dykem Blue, but a fine line Sharpie would do) I am reasonably sure I could handle it. I'm guessing at a cost, but probably something in the neighboorhood of $20 or so, plus shipping, mostly because of the hassle factor of shipping it, etc. PM me if interested so we can do details like addresses and so forth. Gooserider __________________ Designing system, will have Tyan S2468UGN Dual Athlon MOBO, SCSI HDDS, other goodies. Will run LINUX only. Want to have silent running, minimal fans, and water cooled. Probably not OC'c