We've made a minor modification to the manufacturing process to make the rads slightly easier to mount... on the side opposite to the barbs (where mcmad currently has his shroud) we've added 4x tapped fixing points into the lips of the sidewalls, so that the rad can be attached direct to the case with the shroud on the opposing (side with the barbs on) face. This allows the full core area to be mounted flat against the front of the case (with a simple rectangular opening needed) with shroud on the inside so that cold air can be pulled in thru the front of the case, thru the core, thru the shroud....
Once the first modified batch turns up I'll do a photoshoot of fitting the rad in any LianLi PC6x case, and any other cases I happen to lay my hands on.
|