Quote:
Originally Posted by unregistered
if the output of one of the hall effect sensors is removed from the control circuit, the pump WILL become unreliable
|
Just like greenman100 said, I didnt removed any hall sensor output, that will bork the pump. I may update original post to make this clear, I spliced the yellow cable to solder at the cable itself, if you solder directly to the hall sensor you may burn it.
I have been runing this mod for about a week without any problems (brand new pums) and, I have allready 2 pumps(mcp600) runing on my working computer for a year without any problems.
But I have to make 1 thing clear, I only know basic electronics (in other words I don't know how to use a ociloscope
), I just followed the step by step guide from Spiv guide
www.pc-workshop.net . First I tried the mod with a 2 cable single fan, after that I made the decition to try it on the New AquaXtreme pumps for my next computer I am building, and I am testing it as I write this.
If for any reason anyone with a lot of electronic knoledge think this mod is bad for the hall sensor at the pump, pleace, let me know why and if there is a safe way to do it.