Pro/Forums - View Single Post

Puzzdre · 10-23-2002, 05:01 PM

That front side of the pump looks detachable for maintenance of the pump...can you post the pic of the front removed and inner side of the front part?

/edit/
If it looks like I think it does, you can use modellers saw to cut three pieces around the impeller holder (something like radioactive sign) and then use the appropriate barb and make three cuts in one end of the barb (like Y upside down) to match the hole in front of impeller. Only thing is that the sealing material must be more than good (because of the force of attached tube, especially pvc, to prevent ripping the barb out).

10-23-2002, 05:01 PM	#13
Puzzdre Cooling Savant Join Date: Aug 2002 Location: Croatia Posts: 969	That front side of the pump looks detachable for maintenance of the pump...can you post the pic of the front removed and inner side of the front part? /edit/ If it looks like I think it does, you can use modellers saw to cut three pieces around the impeller holder (something like radioactive sign) and then use the appropriate barb and make three cuts in one end of the barb (like Y upside down) to match the hole in front of impeller. Only thing is that the sealing material must be more than good (because of the force of attached tube, especially pvc, to prevent ripping the barb out). __________________ 'Out of cheese error... ...please reboot the universe (press the GBL to continue)' Last edited by Puzzdre; 10-23-2002 at 05:07 PM.