Quote:
|
Originally Posted by Blackeagle
Titan151,
What pump, rad & blocks are in your set up?
|
Well I found keeping all of my connections the same size was a pain in the ass. You get one component that 3/8", a couple 1/2", and one 3/4". So I put adaptors on everything and connected 3/4" tubing. I am running a Swifty 600 pump (1/2"), a maze 4 block (3/8"), and a chiller (3/4") connections. That said I supose that some of the reductions in size are messing with my flow but such is life. As is often the case with water cooling, I started out small at 3/8" and worked my way big to 3/4".
I am going to try and hook up some quick connects between the PC and the chiller. Thinking of trying to use 3/4" air hose connectors. Not to sure how this will work out but worth a try. I found some the other day at the Ace Hardware. I might want to take this dam thing to a LAN someday. Without quick connects trying to lug the chiller and pc together would be quite a pain.