Quote:
Originally Posted by brucoman
measured running current draw 0.3A (with clamp-on meter), up to 0.7A at free flowing
curious as to low current draw as measured
also note, must turn pump on/off with switch in DC line, not AC line or pump often fails to restart (as documented by Iwaki)
Iwaki calls for min. 22v to start, haven't tested that yet
|
Definitely draws more than 0.7A, no matter what you're doing. Would suggest that clamp-on meter is very faulty/inaccurate. I measured my current draw with two different in-line meters.
Pump starts just fine down to as low as 14v.
[Edit: Are you measuring the DC or AC amperage?]