Pro/Forums - View Single Post - Flow and pressure in serial/parallel loops

Long Haired Git · 09-16-2005, 05:03 PM

My figures our out because I forgot to add in the restriction caused by 3/8" fittings on the blocks and rad.

That said, something is wrong with my approximator. The water temp is either too high for serial or too low for parallel.

Sigh.

09-16-2005, 05:03 PM	#7
Long Haired Git Cooling Savant Join Date: Jan 2003 Location: Sydney, Oz Posts: 336	My figures our out because I forgot to add in the restriction caused by 3/8" fittings on the blocks and rad. That said, something is wrong with my approximator. The water temp is either too high for serial or too low for parallel. Sigh. __________________ Long Haired Git "Securing an environment of Windows platforms from abuse - external or internal - is akin to trying to install sprinklers in a fireworks factory where smoking on the job is permitted." (Prof. Gene Spafford) My Rig, in all its glory, can be seen best here AMD XP1600 @ 1530 Mhz \| Soyo Dragon + \| 256 Mb PC2700 DDRAM \| 2 x 40 Gb 7200rpm in Raid-0 \| Maze 2, eheim 1250, dual heater cores! \| Full specifications (PCDB)