Pro/Forums - View Single Post - Flow and pressure in serial/parallel loops

Long Haired Git · 09-17-2005, 03:50 PM

Bingo - I just use BillA's testing results, and yes I used the LRR WW and not a RBX. Should of said so. I don't model blocks, but instead take measured results from other's testing. I can, however, model a conversion to 3/8" barbs pretty easy.

I would argue that the restrictiveness of the GPU block is what is keeping the CPU temps so good. Swap in a less restrictive GPU block, and more flow will be avoiding the CPU block and its temps will go up...

09-17-2005, 03:50 PM	#12
Long Haired Git Cooling Savant Join Date: Jan 2003 Location: Sydney, Oz Posts: 336	Bingo - I just use BillA's testing results, and yes I used the LRR WW and not a RBX. Should of said so. I don't model blocks, but instead take measured results from other's testing. I can, however, model a conversion to 3/8" barbs pretty easy. I would argue that the restrictiveness of the GPU block is what is keeping the CPU temps so good. Swap in a less restrictive GPU block, and more flow will be avoiding the CPU block and its temps will go up... __________________ Long Haired Git "Securing an environment of Windows platforms from abuse - external or internal - is akin to trying to install sprinklers in a fireworks factory where smoking on the job is permitted." (Prof. Gene Spafford) My Rig, in all its glory, can be seen best here AMD XP1600 @ 1530 Mhz \| Soyo Dragon + \| 256 Mb PC2700 DDRAM \| 2 x 40 Gb 7200rpm in Raid-0 \| Maze 2, eheim 1250, dual heater cores! \| Full specifications (PCDB)