Right, various questions, but first, a slight background.
I'm having a waterblock built, proffesional machinists will be making the entire copper plate sections that comprise the block, basically because I have neither the machines or the skills required to make circular grooves 1mm wide and 6mm deep.
Therefore, a very elite precision engineering centre will do it for me
I will also ask them to mill a groove for an o-ring, and need to know how deep and how wide this should be.
I also need to know what type ( width and length etc. ) alan bolts to use to hold this thing together. The machinist will drill and tap the holes in the plates, but I need to know what dimensions these holes should be.
Also, I intend that the top plate have holes for mounting on a Socket A, P4 and Hammer systems, like the top of the Waterchill systems from the Vapochill guys, and I need to know where the centres of each of these holes should be, and what diameter they should be as well.
Cheers in advance,
GTA