Quote:
|
Originally Posted by OzDave
I tried a Maxtor 300gb (5A300J0) in my Merridan Snap. Configuration:
BIOS: 1.2.180
Hardware: 1.1.0
Software: 4.0.830
1. I set the jumpers so that it appears as a 32GB drive.
1a. Snap formated it as 32Gb all ok.
2. Removed jumper
3. Debug / “ide 48bitLBACounter reset” / “ide 48bitLBACounter get” result “0”
4. Debug / reinit
5. Format failed, see below.
6. “ide 48bitLBACounter get” result “3"
I think my BIOS/hardware is too old for greater than 137gb.
|
Configuration:
BIOS: 2.0.282
Hardware: 2.0.0
Software: 4.0.830
Upgrade successful following the same steps as above, this time step 5 worked. Changed from 2x120gb to 2x300gb Maxtor drives.