Pro/Forums - View Single Post

mg · 10-08-2003, 10:09 AM

I've cloned the primary drive to a larger drive and got that to work. I've installed a 2nd drive (looks monstrous as it will not fit in the original case). The OS automatically recognizes and formats the 2nd drive and will give me access to the 2nd drive. But, how do I make the 2nd drive stripe (no data redundancy) or mirror (fault tolerance) the 1st drive?

I have tried config devices predict mirror from the debug web page and got this output:

Request to configure a MIRRORRED device with members: 10000 10008
upon reboot will take 180 seconds to complete and result in:
Logical Device 50000 Total Space (KB): 58251896 - data from device 10000 will be retained, leaving Free Space(KB): 0.
Command: config devices info

Logical Device: 10000 Position: 1 JBOD Size (KB): 57455336 Free (KB): 57397864 Public Mounted
Label:Drive1 Single disk
Unique Id: 0x61B3B7CC23363B7A Mount: /0 Index: 1 Order: 1
Partition: 10000 Physical: 10007 FS Size (KB): 58251896 Starting Blk: 45297 Public
Physical: 10007 Drive Slot: 0 IDE Size (KB): 58615296 Fixed

Logical Device: 10006 Position: 0 JBOD Size (KB): 32296 Free (KB): 32200 Private Mounted
Label:Private Contains system files only
Unique Id: 0x61B3B7CC23363B7A Mount: /priv Index: 0 Order: 0
Partition: 10006 Physical: 10007 FS Size (KB): 32768 Starting Blk: 515 Private
Physical: 10007 Drive Slot: 0 IDE Size (KB): 58615296 Fixed

Logical Device: 10008 Position: 2 JBOD Size (KB): 57455336 Free (KB): 57397872 Public Mounted
Label:Drive2 Single disk
Unique Id: 0x631D519A16A7DA80 Mount: /1 Index: 2 Order: 2
Partition: 10008 Physical: 1000F FS Size (KB): 58251896 Starting Blk: 45297 Public
Physical: 1000F Drive Slot: 1 IDE Size (KB): 58615296 Fixed

The server DID NOT mirror the drives upon reboot. Any thoughts or guidance?

Thanks.

10-08-2003, 10:09 AM	#55
mg Cooling Neophyte Join Date: Oct 2003 Location: Cincinnati Posts: 7	Now, how do I get it to mirror a 2nd drive I've cloned the primary drive to a larger drive and got that to work. I've installed a 2nd drive (looks monstrous as it will not fit in the original case). The OS automatically recognizes and formats the 2nd drive and will give me access to the 2nd drive. But, how do I make the 2nd drive stripe (no data redundancy) or mirror (fault tolerance) the 1st drive? I have tried config devices predict mirror from the debug web page and got this output: Request to configure a MIRRORRED device with members: 10000 10008 upon reboot will take 180 seconds to complete and result in: Logical Device 50000 Total Space (KB): 58251896 - data from device 10000 will be retained, leaving Free Space(KB): 0. Command: config devices info Logical Device: 10000 Position: 1 JBOD Size (KB): 57455336 Free (KB): 57397864 Public Mounted Label:Drive1 Single disk Unique Id: 0x61B3B7CC23363B7A Mount: /0 Index: 1 Order: 1 Partition: 10000 Physical: 10007 FS Size (KB): 58251896 Starting Blk: 45297 Public Physical: 10007 Drive Slot: 0 IDE Size (KB): 58615296 Fixed Logical Device: 10006 Position: 0 JBOD Size (KB): 32296 Free (KB): 32200 Private Mounted Label:Private Contains system files only Unique Id: 0x61B3B7CC23363B7A Mount: /priv Index: 0 Order: 0 Partition: 10006 Physical: 10007 FS Size (KB): 32768 Starting Blk: 515 Private Physical: 10007 Drive Slot: 0 IDE Size (KB): 58615296 Fixed Logical Device: 10008 Position: 2 JBOD Size (KB): 57455336 Free (KB): 57397872 Public Mounted Label:Drive2 Single disk Unique Id: 0x631D519A16A7DA80 Mount: /1 Index: 2 Order: 2 Partition: 10008 Physical: 1000F FS Size (KB): 58251896 Starting Blk: 45297 Public Physical: 1000F Drive Slot: 1 IDE Size (KB): 58615296 Fixed The server DID NOT mirror the drives upon reboot. Any thoughts or guidance? Thanks.