[nikhsub1]

Originally Posted by infinity9

have fun bleeding that puppy? hahah

what do you think your pressure is?

Ahh bleeding was fun. But if you do it right, it is much easier. I first filled the rad as much as possible, then the pumps. Then I had to seal everything up and fill from the t line. You have to rotate the case to get the water to go down. Once there was enough to turn one pump on, i was good to go. I let it run an hour, got most of the bubbles out, then filled the t line half way or so, sealed it up and ran it for 48 hours straight. All air is gone. Have no clue on the pressure.