Hello guys and girls
You probably already know form the title what RCC means. It is Radeon Copper Cooler that *I* made
. The number beside it is the weight of the heatsink in gramms.
Here is the whole procedure of making the heatsink.
It all started with a piece of copper, 20mm thick.
I had to trimm down the big piece to dimensions that I wanted. The piece of copper on this picture below weights about 700g.
Then I began to saw the grooves along in the copper.
After the grooves along were done, I had to make the same grooves transversal that I got really fine fins.
Here is the finished heatsink. I only had to polish the bottom
And heatsink with polished bottom:
The bottom of the heatsink is 4mm thick so that the heat from the core can freely distribute to the whole surface of the heatsink.
Jackal did it again...