Quote:
|
Originally Posted by pauldenton
i'm certain that loosing the BIX would be a good idea then - i doubt a single pabst can draw much air through 2 rads one after the other... you could use the depth freed up for a shroud...
|
LOL, there is a shroud........ the nice plexi one
And it moves just enough air. If I feel it's moving not enough air, I can place a shroud at the back of the case, with one aditonal PAPST, making it a push - pull setup.
all the air that goes out also must go in.... I also have one additonal rad for my alu loop, sucking air out the case with 2 x 8cm PAPST, and I have the NEXUS PSU, who has a 12cm fan.
Letting the fan in the top sucking out to much air, will make that I'll out of balance.