Pro/Forums - View Single Post

babybunny · 07-09-2002, 07:39 PM

The waterblock was lapped to a near mirror finish, and very flat.

I used ASII.

I clamped the WB with becoolings's lexan clamp kit, and I made sure that it was flush with the CPU and the shim.

There is no air in the system, I did a very thorough job of bleeding it which took me a couple of hours.

I added Royal Purple to the distilled water. 4oz for a gallon, as per instructions.

The CPU is DOWNclocked to 1.266 GHz (from 1.333 GHz).

The CPU is UNDERvolted at 1.66V, and I can't go lower.

07-09-2002, 07:39 PM	#3
babybunny Cooling Savant Join Date: Jun 2002 Location: USA - Ohio Posts: 120	The waterblock was lapped to a near mirror finish, and very flat. I used ASII. I clamped the WB with becoolings's lexan clamp kit, and I made sure that it was flush with the CPU and the shim. There is no air in the system, I did a very thorough job of bleeding it which took me a couple of hours. I added Royal Purple to the distilled water. 4oz for a gallon, as per instructions. The CPU is DOWNclocked to 1.266 GHz (from 1.333 GHz). The CPU is UNDERvolted at 1.66V, and I can't go lower.