Pro/Forums - View Single Post

Cathar · 10-24-2002, 04:43 AM

I think this whole O-ring thing is being blown slightly out of proportion here.

I use two O-rings to seal my block. I clamp it down tight. I stuck some thermal paste on the base of the middle plate as a means of checking and there is good contact being made between the tops of the fins and the bracing plate.

10-24-2002, 04:43 AM	#140
Cathar Thermophile Join Date: Sep 2002 Location: Melbourne, Australia Posts: 2,538	I think this whole O-ring thing is being blown slightly out of proportion here. I use two O-rings to seal my block. I clamp it down tight. I stuck some thermal paste on the base of the middle plate as a means of checking and there is good contact being made between the tops of the fins and the bracing plate.