my 0.02 cents
>Could a heatsink be made to fit over both the GPU and RAM? It'd
>have to accomodate the two different levels...
I think 3, if you are considering a standard heatsink. I think you forgot the SMD's. There are several between the memory and the GPU , and between the memory chips. If you check Bladerunner's blocks, you will see several grooves that he had to make to avoid hitting those same components. So you'd need a layer for the GPU, a layer for the memory and a layer which will include the "holes" to avoid the SMD's.
OR , you can take a large copper plate , with a thick base, and mill out all the unnecessary copper leaving only extrudes directly over the contact points (GPU and Memory) but with sufficient height between to miss all the SMD's.
__________________
"we need more cowbell."
|