[bigben2k]

I hear you about the wiring.

I'll be building a frame so that the connectors I got can mate together.

I opted to cut off all the molex connectors, and join all of the same lines together to a single soldered point on a PCB (one for each PSU), which each contain Yo-Duh_87's circuit. The circuit outputs will be joined on a 6 awg bare copper line (using two lines for the ground).

The AC lines will be shared in a similar way.

The power_good signals in my setup will be routed to AND and OR gates, mounted on a seperate PCB, to generate a single power_good signal, where at least two PSUs are running.