Pro/Forums - View Single Post

bigben2k · 03-19-2003, 08:36 PM

Hum... those microtubes would allow the water to clear out nicely, but might create a huge pressure drop.

As for the outlet, it'd be "Radius" style, but much smaller

edit: the only reason I'm sharing this idea, is because I recently noticed that out of all the blocks that BillA tested here, Owen's block was a high performer (details here).

It amazes me to see this type of block perform so well, and with such a steady performance curve. It's also the easiest/cheapest to build, and just about everyone can do it.

So I'll try to keep this concept under the same spirit

03-19-2003, 08:36 PM	#8
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Hum... those microtubes would allow the water to clear out nicely, but might create a huge pressure drop. As for the outlet, it'd be "Radius" style, but much smaller edit: the only reason I'm sharing this idea, is because I recently noticed that out of all the blocks that BillA tested here, Owen's block was a high performer (details here). It amazes me to see this type of block perform so well, and with such a steady performance curve. It's also the easiest/cheapest to build, and just about everyone can do it. So I'll try to keep this concept under the same spirit __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101 Last edited by bigben2k; 03-19-2003 at 08:42 PM.