FS: Swiftech MCW462-UH

Skulemate · 11-15-2002, 02:42 PM

[EDIT] Sold! Thanks for your interest.

I have one Swiftech MCW462-UH waterblock I'd like to sell. It has been used for approximately three months in my rig (I use a solution of distilled water and 3% Water Wetter, with a small amount of blue dye). It is in great condition, and is being sold in the original box complete with instructions and mounting hardware. Please note that there are a few pieces missing from the mounting hardware, but that these parts are extras that Swiftech includes anyways. A complete list of contents is:

1 x MCW462-UH block with 1/2" (nylon?) tube barbs
4 x 6-32 x 1 1/2" screws
4 x standoffs
4 x springs
7 x 0.230x0.096 nylon spacers (should be 8)
5 x 0.220x0.046 nylon spacers (should be 4)
4 x 6-32 nylon hex nuts (one is a bit of a tight fit; came this way)
5 x black fibre washers (should be 8)
1 x Arctic Alumina thermal grease
2 x P4 brackets
4 x 4-40 socket screws

Also included is:

4 x 6-32 steel hex nuts
4 x 3/16" fibre washers

These last two inclusions are the parts that I used instead of the nylon washers included with the Swiftech hardware, as I prefer to have the more solid steel nuts (I can use krazy glue and not worry about breaking the nut this way). Please note that the block is sold as is, though I will say that it's in great condition. I've included a few pictures of the block and contents in order to prove this; you can see my UofT keychain in some of the pictures to guarantee that they're genuine (sorry about my lack of hosting at this time

).

I can be contacted via a personal message, or through e-mail at mike.robbins@utoronto.ca. I'm asking $40US (or best offer) for the block, and the buyer pays for shipping. If there are any questions, please feel free to contact me.

Skulemate · 11-15-2002, 02:43 PM

Another picture, of the block bottom:

Skulemate · 11-15-2002, 02:44 PM

One more, showing all of the contents (except the thermal grease, as I forgot to include it in the photo):

bigben2k · 11-15-2002, 05:52 PM

Question: why are you selling it? I may be interested.

Skulemate · 11-16-2002, 01:27 AM

Ben

I'm selling it because I bought one of Cathar's blocks, and it's an expensive paperweight

. Right now there are four people in line to buy it... I'll let you know if it becomes available though.

Skulemate · 11-16-2002, 06:07 PM

The block is now sold to Slayher (of AMDMB.com). Thanks for your interest.

11-15-2002, 05:52 PM	#4
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Question: why are you selling it? I may be interested. __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101

11-16-2002, 01:27 AM	#5
Skulemate Cooling Savant Join Date: Jul 2002 Location: Toronto, Canada Posts: 381	Ben I'm selling it because I bought one of Cathar's blocks, and it's an expensive paperweight . Right now there are four people in line to buy it... I'll let you know if it becomes available though. __________________ Michael E. Robbins M.A.Sc. Candidate, University of Toronto 12.1 GHz of AMD's finest (17.7 GHz total) crunching proudly for the AMDMB.com Killer Frogs SETI BOINC: Dual Opteron 246s (Iwill DK8N) \| XP2800+ (Shuttle SN41G2) \| 3x XP2400+ (ASUS A7N266-vm) SETI BOINC: 2x P4 2.8E (ASUS P4R800-vm) \| Crunching 24/7

11-16-2002, 06:07 PM	#6
Skulemate Cooling Savant Join Date: Jul 2002 Location: Toronto, Canada Posts: 381	The block is now sold to Slayher (of AMDMB.com). Thanks for your interest. __________________ Michael E. Robbins M.A.Sc. Candidate, University of Toronto 12.1 GHz of AMD's finest (17.7 GHz total) crunching proudly for the AMDMB.com Killer Frogs SETI BOINC: Dual Opteron 246s (Iwill DK8N) \| XP2800+ (Shuttle SN41G2) \| 3x XP2400+ (ASUS A7N266-vm) SETI BOINC: 2x P4 2.8E (ASUS P4R800-vm) \| Crunching 24/7 Last edited by Skulemate; 11-18-2002 at 03:27 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)