Go Back   Pro/Forums > ProCooling Technical Discussions > General Liquid/Water Cooling Discussion
Password
Register FAQ Members List Calendar JavaChat Mark Forums Read

General Liquid/Water Cooling Discussion For discussion about Full Cooling System kits, or general cooling topics. Keep specific cooling items like pumps, radiators, etc... in their specific forums.

Reply
Thread Tools
Unread 08-31-2003, 04:22 PM   #1
Niemiec
Cooling Neophyte
 
Niemiec's Avatar
 
Join Date: Aug 2003
Location: Olsztyn/Poland
Posts: 17
Default My first WC

I was making my WC sinse april, but i may i had my matura exam, later exams for studies and finnaly my water cooling is on
My WC kit includes:
-BlackBox WaterBlock (50*50*20mm, with "M" shapet channels) (photo of beta wersion )

-GPU block made by my friend (40*40*10mm, channel looks like this )
-AquaEL water pump 600 l/h
-Ford Fiesta ALU radiator
-2.4l reservoir
-2m of 12 ID/16 OD hose
-arctic silver 3

Actualy radiator has no fans on. water is cooled only by hot air convection. I had plexy for shroud, but I don't have time to make it

TEST
-Epox 8rda c1
-duron 10*100 1.42V (when i was washing CPU i washed out pencil and now i cant change multiplier)
-MSI GeForce 3 Ti200 128mb @200/490
-256 kingston pc2100
-Fortron 300-60PNA(PF) PSU with 120mm fan @5V
-under PSU i thermocontroled 80mm arctic fan tc-1
-case was open

*ambient 24 C
*water 31 C
*IDLE 34 C (winamp, opera, Outlook)
*STRESS 36 C (United Device and Prime95 torture test running for 6h)


PHOTOS (I'm sorry for quality but camera from motorolla t722i can't make better)
my cooling before WC. alu-cooper based spire heatsink cooled by zalman f2 running at 1900rpm


reservoir



GPU block



CPU block




radiator


overwiev





I'm wating for suggestions.
__________________
1.Duron 1400@2083(12,5*166) Zalman 7000A AlCu | EPoX 8RDA C1 rev 1.1 | WDC 400JB | Leadtek Winfast A310TD | 256MB Corsair XMS PC4000 | LiteOn CD-RW 48/12/48 | FSP300-60PNA(PF) | 3D Mark 2001 SE | Aquamark 3
2. Celeron 433 | SIS620 (all integrated) | WDC 4,3GB | 64MB SDRAM | CD-ROM x8
Niemiec is offline   Reply With Quote
Unread 08-31-2003, 04:59 PM   #2
BrianW
Cooling Savant
 
BrianW's Avatar
 
Join Date: Jun 2001
Location: Desert City in California
Posts: 631
Default

Making your own water blocks, is something I have always had alot of respect for. However your installation leaves much to be desired. I would either figure out how to fit it all in your case, or fit all the external parts into it's own enclosure.

By the way, do you have any fans on your heat exchanger? Is it all passive?

If you need any ideas on specific parts of your rig, please post them.

BrianW

EDIT: Oh yeah, welcome to the forums....
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose).

Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently.

Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)
BrianW is offline   Reply With Quote
Unread 08-31-2003, 05:07 PM   #3
Niemiec
Cooling Neophyte
 
Niemiec's Avatar
 
Join Date: Aug 2003
Location: Olsztyn/Poland
Posts: 17
Default

Quote:
Originally posted by BrianW
However your installation leaves much to be desired. I would either figure out how to fit it all in your case, or fit all the external parts into it's own enclosure.


photos were taken just after putting it all together, a all was standing to be good visible on photos.
My case is to small to hold all WC inside but it's in my plans to make it easy to move.

Quote:
Originally posted by BrianW
By the way, do you have any fans on your heat exchanger? Is it all passive?
actualy all is passive, but in few days im going to make plexy heat exanger stand and plexy stand for fans


BrianW
[quote]
Quote:
Originally posted by BrianW
EDIT: Oh yeah, welcome to the forums....
Thanks
__________________
1.Duron 1400@2083(12,5*166) Zalman 7000A AlCu | EPoX 8RDA C1 rev 1.1 | WDC 400JB | Leadtek Winfast A310TD | 256MB Corsair XMS PC4000 | LiteOn CD-RW 48/12/48 | FSP300-60PNA(PF) | 3D Mark 2001 SE | Aquamark 3
2. Celeron 433 | SIS620 (all integrated) | WDC 4,3GB | 64MB SDRAM | CD-ROM x8
Niemiec is offline   Reply With Quote
Unread 09-07-2003, 06:26 PM   #4
Niemiec
Cooling Neophyte
 
Niemiec's Avatar
 
Join Date: Aug 2003
Location: Olsztyn/Poland
Posts: 17
Default

no more comments??

i buy fan for my heat exenger. i'ts 172mm papst fan, model 6248-008 or 6248/3T, air output is almost 400m^3/h. it's powered by 48V but it's running also at 12V and it' noiseless. when i'll heve it ome i'll post results
Attached Images
File Type: jpg papst.jpg (10.2 KB, 114 views)
__________________
1.Duron 1400@2083(12,5*166) Zalman 7000A AlCu | EPoX 8RDA C1 rev 1.1 | WDC 400JB | Leadtek Winfast A310TD | 256MB Corsair XMS PC4000 | LiteOn CD-RW 48/12/48 | FSP300-60PNA(PF) | 3D Mark 2001 SE | Aquamark 3
2. Celeron 433 | SIS620 (all integrated) | WDC 4,3GB | 64MB SDRAM | CD-ROM x8
Niemiec is offline   Reply With Quote
Unread 09-08-2003, 01:11 PM   #5
babyeater
Cooling Neophyte
 
Join Date: Sep 2002
Location: Ireland
Posts: 42
Default

what car did you get that rad from mine looks nearly the exact same as yours.
Mine wouldn't fit into my case tho i have to extend me case.
babyeater is offline   Reply With Quote
Unread 09-09-2003, 08:04 AM   #6
Niemiec
Cooling Neophyte
 
Niemiec's Avatar
 
Join Date: Aug 2003
Location: Olsztyn/Poland
Posts: 17
Default

I don't know what car exact it is from but mine is also to big to fit in case. I've ordered now Lada rad looking same as Morphling's rad.
Attached Images
File Type: jpg lada.jpg (10.0 KB, 61 views)
__________________
1.Duron 1400@2083(12,5*166) Zalman 7000A AlCu | EPoX 8RDA C1 rev 1.1 | WDC 400JB | Leadtek Winfast A310TD | 256MB Corsair XMS PC4000 | LiteOn CD-RW 48/12/48 | FSP300-60PNA(PF) | 3D Mark 2001 SE | Aquamark 3
2. Celeron 433 | SIS620 (all integrated) | WDC 4,3GB | 64MB SDRAM | CD-ROM x8
Niemiec is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:34 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
(C) 2005 ProCooling.com
If we in some way offend you, insult you or your people, screw your mom, beat up your dad, or poop on your porch... we're sorry... we were probably really drunk...
Oh and dont steal our content bitches! Don't give us a reason to pee in your open car window this summer...