Mounting hole distances for CPUs - Page 2

JFettig · 12-12-2003, 04:48 PM

Heres what I made up, in inches,

Update: 3rd page for new pic.

ChrioN · 01-02-2004, 04:17 PM

JFettig's sketch in cm

Ewout_vB · 01-12-2004, 07:34 AM

Quote:

Originally Posted by ChrioN

JFettig's sketch in millies

is that mm or cm?

2mm is a bit small...

ChrioN · 01-12-2004, 07:43 AM

oops. its corrected now. thanks

redleader · 01-16-2004, 06:25 PM

Quote:

Originally Posted by #Rotor

another nice one....

Those numbers should work on an Opteron, right?

Aleck · 02-06-2004, 06:53 PM

maybe it seems out of topic....

but does anyone here knows the dimensions of a northwood proc die without its heat spreader (naked)

MMZ_TimeLord · 02-10-2004, 10:56 AM

Got an Ati AIW 9700 Pro and ripped the HS/Fan off of it and broke out my calipers...

I'm still adding dimensions and keepouts for a water cooling solution... The "Keep Out" areas are VERY tall... ¼" or so... the smaller orange colored boxes are taller components that match the height of the GPU Shim from the board... these would need recesses milled into a block to clear due to the lower height of the RAM. RAM and GPUs are represented on the front view by the red squares.

I'll post the front again when I get dimensions on it...

Edit: Added a picture overlay... this is how I verified my measurements and actual component locations.

|kbn| · 02-10-2004, 11:37 AM

i maded a sapphire 9700np model in truespace3, its a bit similar to the above one, i used it to do a few designs for a gpu block.

MMZ_TimeLord · 02-10-2004, 02:54 PM

Here is the front and edge of the Ati All-in-wonder 9700 Pro... haven't got the back done with measurements yet... The smaller "Keep Out" areas are the same height as the GPU shim as noted.

Note: I had to use .PNG format to save space... I can export to .DXF and .DWG or provide the original Visio drawings.

ChrioN · 02-16-2004, 02:20 PM

MMZ_TimeLord: do you know if regular 9700's have the same positioned components as the aiw?

MMZ_TimeLord · 02-16-2004, 04:25 PM

No I do not... can't confirm it as I do not have a regular 9700 Pro...

All I can say is if anyone DOES have one... get out a pair of calipers and start measuring against my drawings.

ChrioN · 02-16-2004, 04:37 PM

hell yeah!

So how do you mount a waterblock if you want it big enough to cool all the components? Do you need 1 on each side and then press them together?

MMZ_TimeLord · 02-17-2004, 10:17 AM

Check here ... I've designed a cooling solution for my All-in-Wonder 9700 Pro.

This is just my preference. You can get away with only cooling the GPU if the original card only had a HS/Fan on the GPU and no heatsinks on the RAM.

JeffPH · 02-27-2004, 03:49 AM

can someone who has a dual opteron mobo confirm this sizes. its a MSI K8T Master 2 FAR Mobo. dual opteron thanks in advance

R4fo · 02-27-2004, 06:55 AM

how to make a 1:1 scale drawing - print and then drill the holes?

ChrioN · 02-27-2004, 09:09 AM

so some opteronboards uses the same measures as the older slotA. wierd.

Groth · 02-27-2004, 09:57 AM

For some strange (really, really strange) reason, MSI chose to ignore AMD specification and give the K8T-Master2-FAR P4-style heatsink retention (which voids the warranty for retail processors).

Check the socket-423 spacing in the picture at the beginning of the thread.

JeffPH · 02-27-2004, 10:19 AM

thanks guys so i can use the socket 423? hehe thanks a lot guys

MadHacker · 02-27-2004, 11:07 AM

Quote:

Originally Posted by R4fo

how to make a 1:1 scale drawing - print and then drill the holes?

try a cad program.
I use ACad to create an acurate template for shrowds.

ataxy · 03-11-2004, 11:29 PM

Quote:

Originally Posted by MMZ_TimeLord

Got an Ati AIW 9700 Pro and ripped the HS/Fan off of it and broke out my calipers...

I'm still adding dimensions and keepouts for a water cooling solution... The "Keep Out" areas are VERY tall... ¼" or so... the smaller orange colored boxes are taller components that match the height of the GPU Shim from the board... these would need recesses milled into a block to clear due to the lower height of the RAM. RAM and GPUs are represented on the front view by the red squares.

I'll post the front again when I get dimensions on it...

Edit: Added a picture overlay... this is how I verified my measurements and actual component locations.

id like to know what is the position of the mounting hole from the center of the core

MMZ_TimeLord · 03-12-2004, 02:18 AM

That information starts at post #18 of this thread (first page).

dr.snuggles · 03-15-2004, 06:41 AM

Does anyone have a layout picture of the GeForce FX5900XT with measurements? The memory layout is pretty diffrent from the FX59xxUltra cards...

Here you see the memorylayout..

Gainward FX PowerPack! Ultra/1100XT TV-DVI ...the card i have.

diablito2k · 03-15-2004, 10:10 AM

Quote:

Originally Posted by pHaestus

Originally posted by hara in this thread

is the distance from the middel off the screw hole or on the side of it on the socket 478 ? in realy wondering about it ..

-diablito-

ChrioN · 03-15-2004, 01:46 PM

from the side

SlaterSpeed · 03-15-2004, 02:44 PM

In mm

99% sure its correct

12-12-2003, 04:48 PM	#26
JFettig Cooling Savant Join Date: Feb 2003 Location: Willmar MN/Fargo ND Posts: 504	Heres what I made up, in inches, Update: 3rd page for new pic. Last edited by JFettig; 03-23-2004 at 09:13 AM.

02-16-2004, 04:25 PM	#36
MMZ_TimeLord Cooling Savant Join Date: Apr 2003 Location: San Mateo, CA, USA, Earth Posts: 433	No I do not... can't confirm it as I do not have a regular 9700 Pro... All I can say is if anyone DOES have one... get out a pair of calipers and start measuring against my drawings. __________________ MMZ>TimeLord "Oooooooooh... that's gonna leave a mark!"

02-17-2004, 10:17 AM	#38
MMZ_TimeLord Cooling Savant Join Date: Apr 2003 Location: San Mateo, CA, USA, Earth Posts: 433	Check here ... I've designed a cooling solution for my All-in-Wonder 9700 Pro. This is just my preference. You can get away with only cooling the GPU if the original card only had a HS/Fan on the GPU and no heatsinks on the RAM. __________________ MMZ>TimeLord "Oooooooooh... that's gonna leave a mark!"

03-12-2004, 02:18 AM	#46
MMZ_TimeLord Cooling Savant Join Date: Apr 2003 Location: San Mateo, CA, USA, Earth Posts: 433	That information starts at post #18 of this thread (first page). __________________ MMZ>TimeLord "Oooooooooh... that's gonna leave a mark!"

01-12-2004, 07:43 AM	#29
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	oops. its corrected now. thanks

02-06-2004, 06:53 PM	#31
Aleck Cooling Neophyte Join Date: Nov 2003 Location: Malaysia Posts: 29	maybe it seems out of topic.... but does anyone here knows the dimensions of a northwood proc die without its heat spreader (naked)

02-16-2004, 02:20 PM	#35
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	MMZ_TimeLord: do you know if regular 9700's have the same positioned components as the aiw?

02-16-2004, 04:37 PM	#37
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	hell yeah! So how do you mount a waterblock if you want it big enough to cool all the components? Do you need 1 on each side and then press them together?

02-27-2004, 06:55 AM	#40
R4fo Cooling Neophyte Join Date: Feb 2004 Location: PY Posts: 3	how to make a 1:1 scale drawing - print and then drill the holes?

02-27-2004, 09:09 AM	#41
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	so some opteronboards uses the same measures as the older slotA. wierd.

02-27-2004, 09:57 AM	#42
Groth Cooling Savant Join Date: Mar 2003 Location: MO Posts: 781	For some strange (really, really strange) reason, MSI chose to ignore AMD specification and give the K8T-Master2-FAR P4-style heatsink retention (which voids the warranty for retail processors). Check the socket-423 spacing in the picture at the beginning of the thread.

02-27-2004, 10:19 AM	#43
JeffPH Cooling Neophyte Join Date: Nov 2003 Location: Philippines Posts: 2	thanks guys so i can use the socket 423? hehe thanks a lot guys

03-15-2004, 06:41 AM	#47
dr.snuggles Cooling Neophyte Join Date: Mar 2004 Location: Sweden Posts: 1	Does anyone have a layout picture of the GeForce FX5900XT with measurements? The memory layout is pretty diffrent from the FX59xxUltra cards... Here you see the memorylayout.. Gainward FX PowerPack! Ultra/1100XT TV-DVI ...the card i have.

03-15-2004, 01:46 PM	#49
ChrioN Cooling Savant Join Date: Sep 2002 Location: Sweden Posts: 318	from the side

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)