Less than 3 Hours..... :) - Page 3

G33k · 02-23-2003, 07:46 PM

lol, thought it might be

Balinju · 02-25-2003, 11:25 AM

#rotor, i have another question for you before you kill me, how the h*ll do you make the o ring cut in the block using only a drill press??
and secondly, how deep are the cuts made with the dremmel??

thank you

wannabe · 02-25-2003, 12:01 PM

How does the top look before you put it on? And can you post a picture of the holes placed out? That would be very nice!

g.l.amour · 02-25-2003, 12:23 PM

no O-rings ppl, only pure glue

Balinju · 02-25-2003, 12:39 PM

ahh i understand, would araldite be good for this purpose?

wannabe · 02-25-2003, 12:47 PM

Quote:

Originally posted by g.l.amour
no O-rings ppl, only pure glue

OK, thx! Now i only want a picture showing were to put the holes... Can anyone post one plz?

g.l.amour · 02-25-2003, 01:27 PM

u prolly don't mean this do ya?

what i think u mean is this
http://forums.procooling.com/vbb/sho...5&pagenumber=4

(half way down page)

wannabe · 02-25-2003, 01:38 PM

Quote:

Originally posted by g.l.amour
u prolly don't mean this do ya?

what i think u mean is this
http://forums.procooling.com/vbb/sho...5&pagenumber=4

(half way down page)

... No i meen the paper thingies he printed on were to drill...

#Rotor · 02-26-2003, 10:09 PM

Quote:

Originally posted by Balinju
#rotor, i have another question for you before you kill me, how the h*ll do you make the o ring cut in the block using only a drill press??
and secondly, how deep are the cuts made with the dremmel??

thank you

indeed, I do not use oring, I use marine Goop, and I make sure the two mating surfaces are absolutely free of grit, dirt or oiliness, then just with an evenly smeared coating of goop, over the complete mating surface, ( only one side) I bolt the two plates together, and let dry.... in the 3 years I've been doing it like this.... not a single leak from one of my blocks....

Wannabe
Here is a screenshot of the design... I gave you the dimensions of the block, so you should have no problems in scaling to fit.... the holes are for 0,125t (1/8") drill-bits, but you need to be very accurate, the tolerance is less than 0.04mm

have fun.

only one request from you, and any others, that might find enlightenment.... you gota come post some pictures of your artwork....That is All I ask in return... Post em here, or send them to me for my online Gallery, no matter...

g.l.amour · 02-27-2003, 01:56 AM

ey rotor, u want some more pics for that online gallery? got some nice n shiny ones of that half brass half copper situation.

IdimiDodjimi · 02-27-2003, 06:25 AM

Maybe it's off-topic, but where can I get peltier element on the net. I'm living in the middle of nowhere so I'm curious to find where you can get them over the net (and that they ship it to Croatia)

Balinju · 02-27-2003, 09:18 AM

Hey #rotor thank you alot for your help.

Quote:

only one request from you, and any others, that might find enlightenment.... you gota come post some pictures of your artwork....That is All I ask in return... Post em here, or send them to me for my online Gallery, no matter...

about this, i've been making a block, called squirrel. I don't know if you ever saw it's thread. It should be ready by next week and i will be more than happy to post the results. if you want some pics, i will be more than happy to give you and if you want the drawing, i will be happy too to give it to anybody

that should be our spirit

hara · 03-07-2003, 04:24 PM

Quote:

i've been making a block

What about me?

JCYC5 · 04-03-2003, 07:35 AM

#Rotor, would it be possible for you to make a template for me? I use a P4 system...

pokpok · 04-03-2003, 02:38 PM

i think u have to pay him...$55us for plans

02-23-2003, 07:46 PM	#31
G33k Cooling Neophyte Join Date: Sep 2002 Location: Bristol [UK] Posts: 73	lol, thought it might be __________________ "Success is 99% Failure"

02-25-2003, 12:23 PM	#34
g.l.amour Cooling Savant Join Date: Mar 2002 Location: on da case Posts: 933	no O-rings ppl, only pure glue __________________ yo soy un tiburón

02-25-2003, 01:27 PM	#37
g.l.amour Cooling Savant Join Date: Mar 2002 Location: on da case Posts: 933	u prolly don't mean this do ya? what i think u mean is this http://forums.procooling.com/vbb/sho...5&pagenumber=4 (half way down page) __________________ yo soy un tiburón

02-27-2003, 01:56 AM	#40
g.l.amour Cooling Savant Join Date: Mar 2002 Location: on da case Posts: 933	ey rotor, u want some more pics for that online gallery? got some nice n shiny ones of that half brass half copper situation. __________________ yo soy un tiburón

02-25-2003, 11:25 AM	#32
Balinju Cooling Savant Join Date: Dec 2002 Location: Malta Posts: 495	#rotor, i have another question for you before you kill me, how the h*ll do you make the o ring cut in the block using only a drill press?? and secondly, how deep are the cuts made with the dremmel?? thank you

02-25-2003, 12:01 PM	#33
wannabe Cooling Neophyte Join Date: Feb 2003 Location: Sweden Posts: 6	How does the top look before you put it on? And can you post a picture of the holes placed out? That would be very nice!

02-25-2003, 12:39 PM	#35
Balinju Cooling Savant Join Date: Dec 2002 Location: Malta Posts: 495	ahh i understand, would araldite be good for this purpose?

02-27-2003, 06:25 AM	#41
IdimiDodjimi Cooling Neophyte Join Date: Nov 2002 Location: Croatia Posts: 12	Maybe it's off-topic, but where can I get peltier element on the net. I'm living in the middle of nowhere so I'm curious to find where you can get them over the net (and that they ship it to Croatia)

04-03-2003, 07:35 AM	#44
JCYC5 Cooling Savant Join Date: Apr 2003 Location: Hong Kong Posts: 102	#Rotor, would it be possible for you to make a template for me? I use a P4 system...

04-03-2003, 02:38 PM	#45
pokpok Cooling Neophyte Join Date: Feb 2003 Location: rsm,ca Posts: 87	i think u have to pay him...$55us for plans

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)